Designed according to the debugging and repair requirements of lots electronic engineers. Contains a built-in-lithium battery and works without external power supply
Oscilloscope and Multimeter 2 in 1 function, Easy for carrying, especially for field application
Three Trigger System Mode: Auto, Normal and Single
Lock waveform on the screen and save non-periodical signal
Scope indicator:
Input coupling: AC,DC
Input impedance: 1MΩ 25pF
The maximum input voltage: 40V (probe X1); 400V (probe X10) can be measured 220V voltage; (probe X100) 2000V voltage can be measured
Probe attenuation: 1X,10X
Set the probe attenuation factor: 1X,10X,100X
Sampling Method: Real-time sampling, random sampling
Memory depth: 4K (per channel for each 2K)
Acquisition Mode: Sample, Peak Detect
Vertical Sensitivity: 10mV-5V (Probe 1X) 100mV-50V (probe 10X) (1, 2. 5, 5 step)
Vertical accuracy: +/-3%
Vertical resolution: 8bit
Bandwidth: 20MHz
Real-time sampling rate: 200MSa/s
Horizontal scan range: 10nS/div-5S/div
Three Trigger System Mode: Auto, Normal and Single
Type: Rising edge trigger, falling edge trigger
Automatic detection: Support (50Hz-40MHz)
Math:CH1+CH2,CH1-CH2,CH2-CH1
Cursor measurements: Support time and voltage cursors
Multimeter indicator:
Max display 3999
DCV: 400.0mV/4.000V/40.00V/400.0V/1000V
ACV: 400.0mV/4.000V/40.00V/400.0V/750V
OHM: 400.0Ω /4.000kΩ/40.00kΩ/400.0kΩ/4.000MΩ/40.00MΩ
Cap: 51.20nF/512.0nF/5.120uF/51.20uF/100uF(30Sec)
Diode Testing: 0V~1.5V
Display:3.2-inch, 16-bit true color, TFT, 320 * 240
Low-Voltage Display
Overload protection
Data Hold
Back Light
Power supply: 3000 + mA lithium battery (single cell about four hours of continuous work)
Product size: 202 X 100 X35 mm
Product Weight: Around 500g
Standard Accessories: meter (incl. battery) gift box, test lead, manual, Oscilloscope Accessories (hook pin & probe & Battery charger)
Stand carton:
Packing details: Gift Box
Packing quantity: 10PCS/CTN
|
WH2012 Digital oscilloscopes Images
|